WHOLE HOUSE High Performance GAS Tankless HOT Water Heaters
By heating water only when it’s needed, our powerful gas tankless water heaters cut water heating expenses, while providing continuous hot water delivery.
Instead of maintaining a tank full of hot water at all times, tankless gas water heaters achieve greater efficiency than standard traditional tank-type water heaters.
They really do save energy by heating water only when needed, eliminating energy lost during stand-by operation.
Gas tankless are becoming popular as a replacement for gas storage water heaters and a great choice for new construction and remodeling.
HOW Does a GAS TANKLESS Water Heater WORKS?!
Here is how a Whole House Gas Tankless Water Heater works
Whole house gas tankless water heaters apply the same principle to heat water as standard gas water heaters, but without a storage tank.
The tankless gas heats water as it flows through the tubing in the heat exchanger inside the heater.
When you open a faucet or turn on the shower, instant command for hot water tap is turned on in the home, cold water is drawn into the water heater, a sensor detects water flow and activates the gas burner which warms and heats up the heat exchanger, hot water is instantly brought in within seconds…and keep on flowing continuously.
That incoming cold water encircles the heat exchanger and leaves the heater at its set-point temperature, combustion gases safely exit through a dedicated, sealed vent system.
With traditional tank type water heaters, you have hot water until the hot water tank’s supply is depleted, then you must wait for the storage tank of cold water to re-heat before you again have hot water.
But with a tankless hot water heater, the time it takes for hot water to arrive at the tap is done immediately, a real on-demand switch command : as soon as the faucet is turned on, hot water is delivered : instantly, efficiently, and continuously … until you turn off the faucet.
The best thing about the hot water that comes from a tankless model is that you will receive an endless supply of hot water for as long as the faucet is being turned on.
GAS TANKLESS Water Heaters EFFICIENCY
After heating and cooling, water heating is the next largest energy expenditure in a home.
Today’s natural gas tankless water heaters are more efficient than ever.
The natural gas flame provides instant heat, allowing a gas model to efficiently heat water twice as fast as an electric model.
Selecting The GAS SIZE Tankless Water Heater that BEST SUITS your needs
Interested in converting your home water heating to natural gas tankless ?
This quick chart will help you select The perfect Gas Size Tankless Water Heater that best suits your needs.
ALL of these tankless units are WHOLE House HIGH Performance Efficiency (Diswasher, Washer Machine and Kitchen Sinks are included on top of the number of Showers/Baths in the Whole House Concept)
Some are Battery Operated (Save on electric bills! Also, if the power goes off, you will still have hot water running, 2 D Cell Batteries, they can last up to a year, average 6 months)
If you don’t want to deal with batteries, we also have Plugins , the gas units listed here will only work on 110V (not 220V or 240V)
On a separate note, our Electric Tankless Units work on 220V or 240V (sorry not Electric Unit available in 110V)
Indoor or Outdoor Units, we have them all, your choice!
Only Outdoor units require venting, for info about exhaust, pipe lines, types of vent, sizes … please refer to the Buyers Guide Section under Installation (sorry, we do not provide any installation service but general info on “how to”. Venting Kits and Parts can be purchased under Parts & Accessories.
MORE Listings coming up with up to 10 GPM and 199,000 BTU … such as Takagi & Rheem, we are taking orders on those even if they are not yet listed, please feel free to email if you are looking forward to get one of them.
5-6 Baths/Showers – 16L NG ETL – Self Ignition, please Click on the 16L NG ETL grid below for more info
3-4 Baths/Showers – 16L NG DP – Digital Panel, please Click on the 16L NG DP grid below for more info
3-4 Baths/Showers – 16L NG – Standard, please Click on the 16L NG grid below for more info
1-2 Baths/Showers – 10L NG DP – Digital Panel, please Click on the 10L NG DP grid below for more info
1-2 Baths/Showers – 10L NG – Standard, please Click on the 10L NG grid below for more info
1 Bath/Shower – 5L NG – Also good for ANY remote dwelling such as a Tiny House, Camper, Trailer, Cottage, Shed, Cabin, Gazebo, Pavilion … please Click on the 5L NG grid below for more info
USEFUL INFO ABOUT THE NATURAL GAS UNITS VENTING SYSTEM
Exhaust ___ Direct Vent ___ B-Vent ___ Z-Vent ___ Pipe Lines ___ Flue…
The proper venting Materials and procedure for the venting of the Natural Rise Power Gas Series are as followed :
The preferred material for these heaters is B-Vent which means : doubled walled, galvanized metal outside, polished aluminum inside.
The GA5 and GA10 both require 4” venting and the GA16 requires 5”, but the supplied adapter may be used to go up to 6” (Never reduce in size).
You must establish an 18” collar rise before installing any bends or condensation catches.
Never install a 90 degree bend directly on top of the heater.
The minimum height allowed is 6 feet, this is to allow enough pipe to heat up to properly vent the gases and moisture from combustion.
A straight vertical run is preferable.
IF horizontal runs are necessary then they must always be sloped up at least .25” for every foot and must be kept shorter than 75% of the total vertical length.
Never terminate the venting horizontally, you need the last bit of vertical run to “pull” the remaining gasses that may have cooled in the horizontal run.
Many municipalities require a “chase” to be added up to the roof line for any venting running up an exterior side wall of a structure.
Please check local guidelines.
IF venting through the roof then the termination height will depend on your roof pitch.
IF condensation is a concern for a specific installation then other more specialized materials should be used most common is Z-Vent (double walled stainless steel on both in and outside layers).
IF there are any deviations from these guidelines then please seek the help of a qualified HVAC technician.
Improper venting is risky, could be hazardous, dangerous.
Question: What size is the Flue pipe on the power natural gas and propane units and do they come with a through the wall kit?
ANSWER: The vent pipe for the gas tankless units is 4 inches. ALL units come with a Stainless Steel Chimney adapter piece.
GAS TANKLESS Water Heaters TECHNICAL SPECIFICATIONS
To find out more about the technical specifications, please click on the grid of the selected unit below